PET Gloss Crystal Light Nado Gray Auto Wraps

Gloss car wrap PET light nado gray Car Wrapping Vinyl

The crystal texture film effect makes this unique gray look particularly bright, elegant, pure and refined. 

The car surface forms a cold industrial style with a slightly rational color. The entire car body looks soft and 

eye-catching, which is what contemporary young car owners will appreciate. Favorite style.

Glossy Vinyl Wrap:

Car color-changing film is a common car modification method that can change the appearance color of the car. 

The following are the general steps for applying car color-changing film:

1. Clean the car surface: Use car cleaner and water to clean the car surface and make sure the surface is clean and 

dust-free.

2. Car surface preparation: Use fine sandpaper or sandpaper to sand the car surface to remove old paint, scratches and 

oxide layers. Then clean the surface again with detergent.

3. Measure and cut the film: Use a measuring tool to measure the dimensions of the car surface, and then mark the 

corresponding dimensions on the color-changing film. Use scissors or a knife to cut the color changing film to the appropriate size.

4. Prepare laminating tools: Prepare the tools required for laminating, such as a water spray bottle, a squeegee, a scraper, 

a heat gun, etc.

5. Apply water glue: Use a water spray bottle to spray the car surface wet so that the color-changing film can be attached to it.

6. Film application: Carefully apply the cut color-changing film on the wet car surface. Use a squeegee and squeegee to apply the film smoothly to the surface, making sure there are no air bubbles.

7. Heat shrinkage: Use a heat gun to heat the color-changing film to make it fit better on the car surface. At the same time, use a squeegee and a scraper to apply the film flatly to the surface.

8. Trimming and cleaning: Use a knife to trim the excess color-changing film, and clean the entire film area with detergent to ensure the surface is clean and dust-free.